 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
"After vaccum my furnace(Heat only, Day and Night furnace with model #396GAW00100-ACAA), the fan stop blow but burner will be on when I adjust the temperature below the setpoint on thermostat. My fan had problem last year. It will not stop even after burner off for long time. I had to tap side of...
"After vaccum my furnace(Heat only, Day and Night furnace with model #396GAW00100-ACAA), the fan stop blow but burner will be on when I adjust the temperature below the setpoint on thermostat. My fan had problem last year. It will not stop even after burner off for long time. I had to tap side of...
I have a ducane oil fired furnace, During the winter my burner was giving me problems so I replaced it.. Now that its summer I knew I had to mess around with the wiring Because I only tied in R/W from the tstat to the primmary for heat.. Come to find out the Beckett AFG I installed is not matching...
OK now its my turn with a question, I`ve ran across a gas furnace (older Bard) that's about 20 years old. Someone removed the fan center that was in it for running a/c /ga heat changeover. Wire for wire how do I reinstall a new fan center,, it has 3 wires coming from the relay and 2 from the...
I have a white rogers-steveco 90-113 fan control center and I would like to know how to wire it to my airco hot air furnace so I can use the blower for my outdoor wood boiler and also how to wire the thermostat to the fan control
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
