Ask Experts Questions for FREE Help !
Ask
    Mblazer's Avatar
    Mblazer Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 23, 2012, 11:39 AM
    Wiring
    I have a white,red, and black wire coming out of the box. Black for one switch and red for another. Instructions say to wire blue and black from fan to black out of box. Can I wire black to black and blue to red to be able to be able to use two switches?
    Stratmando's Avatar
    Stratmando Posts: 11,188, Reputation: 508
    Uber Member
    		  
    #2

    Jun 23, 2012, 12:07 PM
    Sure, no problem, the blue on the fan is the light, and the black is the fan motor.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

I need the wiring diagram for a 40" 12 horse, wiring for solonid&starter [ 3 Answers ]

I need the wiring diagram for a 12 horse murray 40" cut approx 2000 model is 40605B from the solonid to starter

Honeywell wiring need to connect to a lux tx9000ts wiring [ 5 Answers ]

I am replacing a honeywell non-programmable with a Lux TX9000TS. The old wiring inputs show e, aux, y, g, o, l, r, b, c (with is optional with batteries) and the new lux is w,y,g,b,o,rc,rh,c. Which wires go were?

Hunter fan wiring model 26107 light fixture wiring sequence [ 2 Answers ]

There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?

Wiring direction for a multi wiring system thermostat! [ 3 Answers ]

I have a 2 wire system (3 phase), need to connect multi wiring system thermostat! Need to know if, its correct to just use line#1, and the device already has a jumper?

John Deere - My dog ripped the wiring Out - Need Wiring Diagram or photos [ 2 Answers ]

I have a 3 year old L110 that ran fine until last week. I think my dog chased a chipmunk up under the hood and in trying to get to him ripped a bunch of wires out. I have spliced back together the obvious wires (color coded) but I have one black wire that I assume is a ground(?) and the two...

View more questions Search