Williams Heater Model #1403612.

Check out some similar questions!

Williams 10k wall heater, just installed, gets no gas to pilot. [ 6 Answers ]

.It's been sitting uninstalled for a year, then I installed it, it has gas going to the valve, but NO PILOT, and it seems no gas is coming to the pilot. 'Where do it begin priming or restarting a unit that's been sitting for awhile? It's still in new condition and barely ever used. Thanks...

I have a williams wall heater. [ 1 Answers ]

I replaced with non programmable digital thermostat. I connected the two wires correctly. I turn pilot on but when I turn the thermostst to the temp I want the pilot turns off. Any I deas? Should I get a new old style thermostat. The old one would work if I put a screw driver tip on the contact...

My Williams Nat Gas Heater Pilot will not lit up [ 0 Answers ]

However hard I tried to keep the pilot knob pushed in, I cannot get the burner inside heater to lit up (forget staying lit - it does not lit up at all). This is just the second year with the heater - so quite brand new. Gas seems to be on, because I can get the heater working in a different room....

I havea a marley model 2544wc 4ft heater that just quit I have power into the heater [ 1 Answers ]

I have power into the heater and at the poles of the thermostat breaker not tripped and still rocks on and off solid

Coleman Model 69 Wall Gas Heater [ 1 Answers ]

I just bought a house that has one of these in the garage. I can get the pilot light to go== But as soon as I go to put it to on it goes out? It also has a little gas lever that I have fooled around with but it just doesn't want to go into a pilot light stay lit mode. HELP!!

View more questions Search

Check out some similar questions!

Add your answer here.