Ask Experts Questions for FREE Help !
Ask
    jetyal's Avatar
    jetyal Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 20, 2012, 08:27 PM
    White rodgers thermostat won
    Air conditioning will not run. The setting just shows a snowflake like symbol sometimes blinks sometimes just there. What is this and what should I do?
    White Rodgers's Avatar
    White Rodgers Posts: 9, Reputation: 1
    New Member
    		  
    #2

    Jun 21, 2012, 06:12 AM
    Hi. This is Aaron Moratalla from White Rodgers. I can help you with you understand your thermostat but I need to know the model/type number that you are using. You can look for it inside by pulling the front cover off. You can also try to reach tech support at 888-725-9797 and we will be happy to assist you.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Changed over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I have changed over to a Honeywell programmable thermostat model RTH7400. Did all the correct wiring as stated in the books but when set to cool, the heater kicks on instead of the central air conditioning. What...

White rodgers IF 80 44 thermostat? [ 0 Answers ]

How to get into Celsius

White-rodgers thermostat help[? [ 1 Answers ]

I replaced the batteries in thermostat model white -rodgers #1f80-51 and now my heater pre heats but won't firewh

Changing over from White Rodgers Thermostat to Honeywell thermostat [ 3 Answers ]

I have a White Rodgers 2 stage heat/1 cool model 1F58-58 heat pump thermostat that I want to change over to a Honeywell programmable thermostat model RTH7400. I need help in trying to figure out the wiring part of this whole thing. Can someone out there please help. I would certainly appreciate...

White rodgers thermostat black and white wires [ 1 Answers ]

We have a very old white roger thermostat for our gas furnace and are replacing it with a honeywell rth2310. Our current thermostat only has two wire one balck and the other white. Where do I make the connections.

View more questions Search