Ask Experts Questions for FREE Help !
Ask
    Reallywest's Avatar
    Reallywest Posts: 2, Reputation: 1
    New Member
     
    #1

    Jun 19, 2012, 05:57 PM
    Do I have to install bathtub stringer?
    What if bathtub installed without stringer on studs, is it OK or not? Thank you.
    massplumber2008's Avatar
    massplumber2008 Posts: 12,832, Reputation: 1212
    Senior Plumbing Expert
     
    #2

    Jun 19, 2012, 06:52 PM
    Hi RW

    I install a stringer with every tub UNLESS the manufacturer's instructions say otherwise... ;)

    If this is a cast iron or steel tub... absolutley required.

    If a fiberglass or acrylic unit you need to consult with the installation manual (or tech. services at company).

    Some acrylic units want a bedding substrate and some void warranty if a bedding substrate is used, so again, really is a manufacturer specific question... ;)

    Mark
    Reallywest's Avatar
    Reallywest Posts: 2, Reputation: 1
    New Member
     
    #3

    Jun 19, 2012, 07:09 PM
    Thank you very much masspluber2008!

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Is there anyway you can install a bathtub in a basement without jackhammering [ 2 Answers ]

We just purchased a house and in the basement there is a toilet and a sink but no bath tub. We would like to install a bathtub but do not want to jackhammer up the concret is there another way to do it?

Install a bathtub. [ 4 Answers ]

I have a house built in 1982. It has American Standard 5ft by 30inches square bathtub surrounded by tiles. It is looking old with a little rust to the left of it where the pipe is located. I am planning to replace this old bathtub by myself. I have already replaced all the toilets and sinks in...

Bathtub install [ 2 Answers ]

We recently pruchased a used jacuzzi tub. I bought new plumbing for the drain and overflow. I am installing this in our basement but I am a little confused. I have a 4" pipe sticking out of the floor about 3" or so. Inside this pipe is the 1 1/2" drain. With the drain on the tub being flat to...

Bathtub faucet install [ 1 Answers ]

Hey I wonder if you can help me. WHat are the standard heights for the bathtub faucet, water adjustment, and shower feed. Pete

Bathtub install [ 1 Answers ]

How to install a bathtub on concrete floor with no rough in? Should I put in a sub floor??


View more questions Search