 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Lawn tractor problems
I replaced the blades on my troy bilt and started the mower to see if they worked. When I tried to move the tractor would not move in low gear. I could place it into 7 or 8 and it wold move fast but at 1 to 5 it would not move or it would try to move very slow at 5. It did the same thing in reverse. It has an electrostatic transmission. Is the transmission going out?
|
||||
|
||||
|
Hi,
The these sound unrelated. I believe you mean it is transmatic. They occasionally wedge the belts when shut off with the clutch engaged. Getting it up to speed once should solve that. Check the idlers and springs for them. Peace, Clarke |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a Craftsman 20 HP 42" mower, Automatic Transmission Model #917.27664, Lately it has not wanted to go in reverse. Now the forward is acting up. I have changed the drive belt and purged the unit. What else can I do?
I have a White LGT 165 lawn tractor that stopped running in the middle of cutting my lawn . The battery is fully charged, it seems to be getting gas OK, I checked the spark plugs and they looked good. What do I try next?
I have a Sears 42 inch lawn tractor. Replaced a dead battery. Now when I turn the key to start I hear a whining noise and engine does not turn over. Any suggestions on a FIX?
My old craftsman lawn tractor cranks just fine but when I let off the clutch it sputters and dies. As long as the clutch is down its fine. As soon as it gets any resistance its just dies. Any suggestions?
Were is the oil filter located on a mtd hydrostatic lawn tractor.
View more questions Search
|
