Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
New Vessel Sink without overflow drains slow
[ 59 Answers ]
I installed a new vessel sink without an overfolw and it drains very slow. When I loosen a connection and let some air in it drains fine, just like it did with the original undercounter sink. So I assume I need to do something to compensate for the lack of an overflow. Any suggestions? Thanks.
Installing pop up drain in new vessel sink
[ 4 Answers ]
I am refurbishing my bathroom and installing a vessel sink. It came with the drain, a pop up drain, but it did not come with the instructions for installing this drain. It appears simple enough, but I do not want to install it incorrectly and experience any leaking around the vainity top I made...
Vessel sink draining slow
[ 2 Answers ]
I have an ongoing problem with a new vessel sink. Question is there a minimum length between the bottom of the sink and the P-Trap?
Hooking up a vessel sink
[ 1 Answers ]
I'm installing a vessel sink atop an adapted wooden vanity (which started life as a night-table). We're raising the vessel up about four inches by constructing a box for it on top of the surface of the vanity. My question is, can someone show me a diagram of the proper way to extend the drain...
Kitchen Sink/Laundry Sink Drain Vent Non-exist
[ 3 Answers ]
The set-up from kitchen sink leading down to drain to basement: 1. Kitchen sink - (R side) - connected to a P drain I think you call it -PVC-, connected to a "metal" T, which has a Studer vent gizmo attached to the top of it, then draining into a metal pipe straight down to the drain in the... View more questions Search
|