 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Water left on bathroom faucet
I recently installed a new bathroom faucet. I am noticing that after water runs for several seconds, a small reservoir of water is left on about a quarter of the top of the drain. I took the drain out and installed again (should note there that I did use plumbers putty), and am still seeing the same thing. Is this an issue or something to be concerned about?
|
||||
Check out some similar questions!
Just moved in 4 months ago. Cold water comes out of the hot water faucet, but this occurs only in one bathroom. Everywhere else (kitchen, other bathrooms), the hot water comes out okay. House is ranch-style (1 level). Even if I wait a long time (10 minutes), water still stays cold in just that...
Just installed a new bathroom sink faucet . No water commin through Took apart & reconnected again. Shut of main, ran all other faucets in case of air Still nothing?
Hi Everyone, I'm new, and soliciting for any advice someone can give. I recently replaced 2 of my bathroom faucets. One works great. The other seems to have dirty water run out of it for a couple seconds when it sits for 8 hours or so. I have tried these items. 1.disconnected the water...
Hi All, I'm trying to install a new bathroom vessel faucet that came with 1/2 inch female hose connections to my angle stops which have the standard 3/8 connections. Lowe's & Home Depot didn't know what to do with it. I tried a converter fitting from a local plumbing shop but the connections...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
