 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Put in a new fan motor and capasitor and fan ran for a night and quit again.
Replaced motor and capasitor with the correct parts and the fan motor ran for the night and then shut down as with the old motor. Is there another problem that can shut down the fan motor whit the compressor still running.
|
||||
Check out some similar questions!
I am repacing the condenser fan and capacitor on my very old Rudd. The old fan has three wires and the new has four (a white, a black, a brown and a brown/white. The new cap. Is 40/5 mfd. The connection diagram on the new motor indicate: White and black go to "line" and brown with brown/white go to...
The fan on my central heat and air unit shuts down when it gets hot during the day, but when it gets dark it runs fine. Will it be safe to run the air conditioner at night before replacing the fan motor?
It's a goodman furnace Fan motor quit . I could jump start the fan by turning the armature through the fan. I changed the capacitor with the same speks and now the led light just flashes.
I have 2 cables ran to fan one is power one is switch cable how do I wire the fan
It from TPI Corp - 240 V Furnace F Series Model Number 2 1 F 12 T F 01 - I replaced the motor myself 2 years ago along with the Capacitor. Then it acted up again about 1 year ago and I replaced the Electric Heat Sequencer (boy was that a challenge!). The problem is that the fan stop working in the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
