Ask Experts Questions for FREE Help !
Ask
    JEScheick's Avatar
    JEScheick Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 8, 2012, 10:33 AM
    My Craftsman GT3000 lawn tractor mowing blades just stop working.
    My Craftsman GT3000 lawn tractor mowing blades just stop working while I was mowing, just like someone turn them off. All belts are in place. The switch which engages the belts is doing nothing.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 8, 2012, 04:55 PM
    Hi,
    No power to the switch, failed clutch or broken wire.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Craftsman lawn tractor model 917.256524 when I engage the blades the belt will not tu [ 5 Answers ]

When I engage the blades on my 917.256524 the belt does not spin is there a tension adjustment for it?

Craftsman lawn tractor blades not engaging [ 2 Answers ]

My lawn tractor blades do not engage when I lift the attachment clutch lever. I replaced the belt but that did not fix the problem. Anyone else had (and resloved) this problem?

J Deere Lawn Tractor blades don't stop [ 1 Answers ]

John Deere L110 lawn tractor and the mower blades will not stop when the Mechanical PTO is disengaged. I think this is a problem with the safety interlock circuit. Where is it, and can I replace it myself if I order the part?

Craftsman Lawn Tractor, 2 blades don't turn [ 1 Answers ]

I have a Craftsmand Lawn Tractor 18.5 HP, two of the blades don't turn. When manually turned all three blades turn, could it be the drive belt? Only one blade turns when engaged.

Craftsman Lawn tractor blades won't disengage [ 1 Answers ]

The blades on my Craftsman Lawn tractor 917.270860 won't disengage. I looked at my buddies craftsman and it appears that the clutch cable is not moving the pulley to disengage the blade belt, I guess it is frozen. How do I remedy this? Pete

View more questions Search