Ask Experts Questions for FREE Help !
Ask
    eaglevale42's Avatar
    eaglevale42 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Aug 19, 2009, 02:35 PM
    J Deere Lawn Tractor blades don't stop
    John Deere L110 lawn tractor and the mower blades will not stop when the
    Mechanical PTO is disengaged. I think this is a problem with the safety interlock circuit.
    Where is it, and can I replace it myself if I order the part?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Aug 19, 2009, 03:58 PM

    Hi,
    I would severely doubt it is safety equipment. The switch is, however, under the dash and can kind of be seen in the battery photo toward the upper right (where the wires go.)
    OMGX21647_K3
    And the parts breakdown is at:
    John Deere - Parts Catalog
    And check out the deck belt picture and the spring #11 (part #GX10120) since it provides the pull-off pressure for the deck engagement cable.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John Deere 318 Lawn tractor ,Mower Blades won't kick in to mow [ 3 Answers ]

:DI have a John Deere 318 been working on for a couple years finally got it going but will not engage the mower blades It used to run good and then it would just shut the blades off. I would let it cool off and start again and it would run the blades for awhile then quit. Now it won't kick in at...

Lawn Tractor runs but dies when blades are engaged [ 4 Answers ]

My troy bilt 17.5 42" lawn tractor was cutting the lawn just fine when the wife I love hit a rise in the yard, slamming the blades into the ground and killing the engine. Now, it will start just fine but when you engage the blades, it kills the engine. What did the wife I still love do to my lawn...

Craftsman Lawn Tractor, 2 blades don't turn [ 1 Answers ]

I have a Craftsmand Lawn Tractor 18.5 HP, two of the blades don't turn. When manually turned all three blades turn, could it be the drive belt? Only one blade turns when engaged.

Craftsman Lawn tractor blades won't disengage [ 1 Answers ]

The blades on my Craftsman Lawn tractor 917.270860 won't disengage. I looked at my buddies craftsman and it appears that the clutch cable is not moving the pulley to disengage the blade belt, I guess it is frozen. How do I remedy this? Pete

View more questions Search