Ask Experts Questions for FREE Help !
Ask
    Richard47's Avatar
    Richard47 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Jun 6, 2012, 09:14 AM
    Troy bilt lawn mowers troubleshooting
    Have a Troy Bilt rideing mower I was cutting gras and it just quit got to checking different things gas was full, battery was good, changed switch still would not start checked fuse it was blown changed fuse and it blowed that one anyone have same problem.
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jul 8, 2012, 04:00 PM
    Hi,
    Something is causing too much current in the wiring harness. When did it blow? If when turned to the start position, suspect the key switch.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt lawn mower troubleshooting [ 3 Answers ]

I havae a 2007 Troy Bilt Super Bronc with which I have many reoccuring problems. The latest and most reoccuring is the cable that engages the blades. I just replaced it again and now the blades won't turn. What is the fix?

Troy bilt riding lawn mower troubleshooting guide? [ 1 Answers ]

Was using my troy bilt rider when idle dropped a notch or two even though throttle was still up to highest idle(rabbit). It's a 2006 23.5 hp. What could be the problem? Changed air filter,gas filter used carb cleaner on carb,added a little fuel system cleaner to gas,checked fuel line for debris and...

Troy bilt lawn mower troubleshooting [ 2 Answers ]

I have a troy bilt model 609 and the mower will not engage

Troy bilt lawn mower troubleshooting? [ 0 Answers ]

I have a Troybilt 18hp 42in cut pedal drive Model#188392.The mower runs good & cuts good but the battery light blinks & the battery is being drained when sitting but will charge in a few minutes.I have had the battery checked & it is still good.Also I would like to bypass the safety switch for the...

Trouble shooting troy bilt lawn mowers [ 2 Answers ]

I have a troy bilt riding mower model 13ax60tq766 that will statrt and run about 5 seconds. The head light have no switch to them and when the cut off the engine stops running. I am no electrician so could it be a bad ignition switch?

View more questions Search