Ask Experts Questions for FREE Help !
Ask
    longta58's Avatar
    longta58 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 15, 2010, 08:21 AM
    Troy bilt lawn mower troubleshooting
    I havae a 2007 Troy Bilt Super Bronc with which I have many reoccuring problems. The latest and most reoccuring is the cable that engages the blades. I just replaced it again and now the blades won't turn. What is the fix?
    jsfocke's Avatar
    jsfocke Posts: 310, Reputation: 37
    Full Member
    		  
    #2

    Apr 15, 2010, 08:41 AM

    The biggest problem I have with engaging the blades is that the linkage on the deck get rusted and very hard to move. Try removing the deck and work the linkage by hand, use a little lubricant (taking care not to get any on the pulleys or belts) and you should be able to free it up. Then the cable won't be working so hard to engage the blades.

    This is just a solution to one possible problem.
    fun33's Avatar
    fun33 Posts: 1, Reputation: 1
    New Member
    		  
    #3

    May 4, 2011, 05:21 PM
    1997 troybuilt rideing mower want turn over .just dragges and clickes . Battery is hot have jumped it off same thang . 19 hp kohler
    Alaskangal's Avatar
    Alaskangal Posts: 1, Reputation: 1
    New Member
    		  
    #4

    Nov 3, 2013, 07:04 PM
    Super Bronco Model 60TG, changed the drive belt but it is loose and won't engage when put into forward or reverse. Just heats up the belt and pully. Double checked the pully placement/belt according to diagram. Is there a spring that may have broken?
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Troy bilt lawn mower [ 2 Answers ]

I know this is easy but I've never mowed a lawn so here goes... what kind of oil do I need to put in a Troy Built lawnmower that 6.75 horsepower? Thank you,

Troy bilt lawn mower troubleshooting [ 2 Answers ]

I have a troy bilt model 609 and the mower will not engage

Troy bilt riding lawn mower electrical troubleshooting [ 4 Answers ]

Troy bilt 1998 model 13AJ609G766 , automatic transmission, 18.5 Horsepower, 42" deck. Deck is not installed as yet. When releasing the foot brake pedal about half up, the engine stops. This is what I have done so far, checked the alignment of the brake and pto switches. Checked for...

Troy bilt lawn mower [ 2 Answers ]

I've just purchased a house and I'm new at taking care of a lawn. I purchased a Troy Built 2 cycle mower and needed more oil. I bought 4 cycle oil and now the lawn mower is smoking. Did I buy the wrong oil?

View more questions Search