 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
i have an above ground oval pool and the liner is slipping help
we have an 18x39 oval pool installed 3 yrs ago. We never emptied it. This year we did because we added sand to the sides cause you could feel many dents when you were in the pool. So we added sand to the sides, made sure all was nice and smooth. After we added the liner completely to the pool. When all was done we began to fill it. After a few feet of filling it the liner kept slipping on the sides,emptied the pool again. Fixed the liner and filled it again. And the problem keeps happening.help please
|
||||
|
||||
|
As the pool is filling ,the sides kick out a little. This will cause liner to slide down the sides a small amount.
When installing liner allow about 12'' of overlap at top edge. This will decrease as u fill. As long as u still have about 3'' overlap when pool is fill, u are good to go. Chuck |
||||
Not your question?
Ask your question
View similar questions
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
How to fix in ground pool liner slipping
[ 0 Answers ]
The inground pool is 35 by 16 ft an 9 ft deep at deep end . Deep end of pool, the liner is slipping. So far about four inches. What to o??
What is wrong my pool liner is slipping
[ 1 Answers ]
My pool is a 30x54 we have had it for about 7 years we have never had any problems. We completely drained the pol this year and we added sand around the edge where the liner is slipping we started filling it up and it started slipping again we have drained it 3 times I only let about 5 inches of...
Pool Liner slipping and wrinkles
[ 3 Answers ]
Ok, so we're ready to start cleaning the pool and get it opened soon. We took the cover off the other day and noticed the liner has separated from the wall some and there are wrinkles on the shallow end. The pool is about half full (18x36, 25k gallons... when full.) Any ideas on how we're to...
View more questions Search
|
