Ask Experts Questions for FREE Help !
Ask
    packerfan4to84's Avatar
    packerfan4to84 Posts: 1, Reputation: 1
    New Member
     
    #1

    Jun 2, 2012, 06:50 AM
    Riding mower solenoid makes one click and won't start
    I have a Murrary Ultra riding mower that won't start. What I have already done is, replaced the solenoid, replaced the starter, checked and cleaned cables, and had the battery tested. When I try to start the mower, all I get is a "click" which sounds like it is coming from the solenoid, and nothing else. I'm not sure what to try next. Any help would be appreciated!

Check out some similar questions!

Solenoid wiring for a Murray Riding Mower [ 8 Answers ]

Can anyone tell me how to wire a 12HP 38" Cut Murray Riding Mower from the switch to the solenoid to the battery. I have one wire that attaches with a clip to a post on the solenoid and a yellow wire that goes to the switch or the seat cutoff and a large red wire with a smaller red wire attached...

How to change solenoid on craftsman riding mower [ 2 Answers ]

Mower won't crank. New battery

Deere 175 hydro won't start. No solenoid click or power. [ 1 Answers ]

Battery good. Deere 175 hydro won't start. No solenoid click or power to starter. Recently, have had to press repeatedly on brake to engage starter. Shorted out brake solenoid with no effect. Battery is good. Any other suggestions? Should I jump the starter directly from the battery to...

Starter solenoid for riding mower [ 2 Answers ]

I need to know about a solenoid for a mower, are both poles on the solenoid supposed to be hot all the time? Mower has no power to the starter and the battery is charged, try to find out to test the starter and the starter solenoid.


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.