 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
Can anyone tell me where the wiring goes from the battery to the distributor I need to know everything in between I can't figure out why my distributor is not getting power to the ignitor...
I have a 98 Honda civic that I am having problems. The car will run but good for a couple of days but all of a sudden it will shut off. I wasn't getting any spark so I replaced the distributor . I bought it at AutoZone I know its remanufactured and I am still having the same problem.
Okay my distributor bolts are loose so I can put it back in time because I got a different head for my car. So when I turn the car over to start it the distributor like tries to come out an gets all tight an I can't move it. I looked at the head but my shaft is not bent? Its not the distributor......
Can I put a ICM from a OBD2 distributor into a OBD1 distributor on a honda civic
I need to remove my igniter so do need to remove my distrubetor from 1988 honda civic lx, and do I have to realing the timing. Thank you
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
