Ask Experts Questions for FREE Help !
Ask
    ba$h's Avatar
    ba$h Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2010, 09:53 AM
    Can I put a ICM from a OBD2 distributor into a OBD1 distributor on a honda
    Can I put a ICM from a OBD2 distributor into a OBD1 distributor on a honda civic
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Mar 2, 2010, 12:47 PM

    It's not likely a good idea. The chances of it working well are slim and it could be a major safety hazzard.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bench testing honda distributor [ 1 Answers ]

1991 Honda prelude 2.05 distributor produces a #1 cylinder code (9) CAr runs poorly

Honda rotor is melting in distributor [ 2 Answers ]

I have a 1990 crx 1.5 liter. The rotor has melted and spun on the shaft twice now. It appears to be getting very hot and then spinning. The coil is inside the distributor. Is this the cause of the heat or could it be something else? Thanks roy

90 Honda Accord Distributor Rotor . [ 4 Answers ]

... I have no idea how to remove the rotor on my '90 Accord's distributor so I can test the coil. Any guidance would be greatly appreciated! -Geo.

1991 Honda Replacement Distributor [ 1 Answers ]

I have a 1991 Honda Civic that needs a new distributor. The bearing is bad along with the internal wiring, coil, cap and rotor. It will cost me more to fix than the price of a new one on the internet. Does anyone have any experience with the inexpensive distributors you can buy in the $125 - $150...

1999 Honda civic new distributor [ 2 Answers ]

I have a 1999 Honda civic that wouldn't start. I paid $600 for a new distributor. The car has approx 48,500 miles on it. I have never had to replace a distributor on a car before. Is this a common problem?

View more questions Search