Ask Experts Questions for FREE Help !
Ask
    1biffy's Avatar
    1biffy Posts: 2, Reputation: 1
    New Member
     
    #1

    May 27, 2012, 02:25 PM
    Heat/ cool switch on furnace
    On heat furnace works fine heating. On cool outside unit and furnace blower run continuous. Have to turn heat/cool switch to heat to stop a/c.The thermostat was recently replaced.

Check out some similar questions!

Trane heat pump doesn't switch from heat to cool [ 2 Answers ]

Just noticed a problem relating to my Trane Weathertron thermostat (8 wire system)that is connected the Trane heatpump. The Green wire on the G terminal (fan) was touching the Orange wire on the O terminal (cooling valve). Might this be causing the system not to switch from heating to cooling?

GE Furnace Won't Heat OR Cool [ 2 Answers ]

Good Morning, We live in Fayetteville, NC and it's starting to get cold. General Electric Gas Pack model number BLD055E936B1 manufactured in the early eighties has decided to quit. It is a forced air model with a standing pilot. Pilot works great... but the main burners won't light. This has...

HEAT-OFF-COOL system switch - AUTO-ON fan switch [ 1 Answers ]

From an Email: ''Dear asklabman, I am a first time house ownere & having an issue with my Honeywell T8112 Programmable Thermostat. Thermostat has two switches for the fan - AUTO FAN & FAN ON switches and three switches for thes system, COOL, HEAT & System OFF modes. Yesterday we turned ON...

HEAT-OFF-COOL system switch - AUTO-ON fan switch. [ 2 Answers ]

Dear Gurus, I am a new house owner & not used to thermostats. We have Honeywell 8112D thermostat. We recently turned ON our Fan switch (in the thermostat). Now the fan is not turning off. It is continuously running even when the system is in OFF & Fan is in AUTO mode. We tried reducing the...

Furnace will not switch from heat to cool [ 2 Answers ]

My furnace operates fine, until I switch from heat to cool. When I switch it willnot do anythig and I have to call out a reapirman. My house was under warranty and I thought the problem was resolved, but it wasn't . What are some thins I can look at?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.