Ask Experts Questions for FREE Help !
Ask
    frcuster's Avatar
    frcuster Posts: 1, Reputation: 1
    New Member
     
    #1

    May 26, 2012, 01:45 PM
    My well pump will not prime
    My meters HC50 well jet pump will not prime. I put 20 gal of water in through the pressure gauge fitting and it keeps belching and wanting more. Prior to it losing prime it ran constantly but still delivered water. When I adjusted the shut off switch I noticed that the pressure gauge fell to "0" when it cycled OFF. What is the problem?
    speedball1's Avatar
    speedball1 Posts: 29,301, Reputation: 1939
    Eternal Plumber
     
    #2

    May 27, 2012, 06:56 AM
    Quote Originally Posted by frcuster View Post
    My meters HC50 well jet pump will not prime. I put 20 gal of water in thru the pressure gauge fitting and it keeps belching and wanting more. Prior to it losing prime it ran constantly but still delivered water. When I adjusted the shut off switch I noticed that the pressure gauge fell to "0" when it cycled OFF. What is the problem?
    It sounds like you have a faulty foot/check valve that's not allowing your system to hold pressure or prime. The solution would be to replace the valve. Good luck, Tom

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Pump lost prime and overheated motor runs but does not pump is the pump fried [ 4 Answers ]

Over night the pump lost primed and melted the sched. 40 fittings I replaced all the fittings and cannot get pump to prime the motor runs is it possible that the propeller was damaged from the heat?//

How to prime the pump for a well that serves a geothermac heat pump [ 0 Answers ]

The power went off for a while this afternoon. When it came back on... the pump had lost it's prime... how do I prime the work to get my air conditioning on again?

Water well pump won't prime I know but I can't get to prime [ 0 Answers ]

I know how to prime a water well pump but Icant get it to prime . How would I know if something wrong with the pump


View more questions Search