Ask Experts Questions for FREE Help !
Ask
    sjkudra's Avatar
    sjkudra Posts: 2, Reputation: 1
    New Member
     
    #1

    May 25, 2012, 05:37 AM
    Seat switch on john deere 316 troublshooting
    I have a John Deere 316 tractor which will start sporadically. Scenario: Engage the foot pedal to start tractor. No solenoid click, no turning over of motor. The first time it occurred, I cleaned the seat switch and it started. Happened again and in attempting to get it started, I leaned forward pushing the seat back to the limit and it started. Then it got to where it wouldn't start at all. Checked the seat switch with multimeter and switch is good. Moved the seat forward and back, tried to start again and it started. Ran for 3 hours bushhogging my pasture. Put it up. Attempted to start again a few days later and same situation. Checked battery which was low on water. Topped it off and tried again. Still no solenoid click or attempt to turn over. Put in brand new battery yesterday and still no solenoid click or attempt of motor to turn over. Lights work.

    Is there some other place to check that the 'deadman's' seat switch is working correctly?
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
     
    #2

    Jun 30, 2012, 10:30 PM
    Hi,
    Best guess is a bad key switch and the other things are throwing you off.
    Peace,
    Clarke
    sjkudra's Avatar
    sjkudra Posts: 2, Reputation: 1
    New Member
     
    #3

    Jul 1, 2012, 04:37 AM
    Thanks, we were going to try that next, but my husband has health issues and we haven't been able to get back to it yet.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

John deere 316 dies - starts later [ 0 Answers ]

Hi I have a John Deere 316 with 2 cyl Onan. It starts fine, runs for 10-15 minutes, then dies. It turns over, but won't start until later. Ideas? Thanks!

John deere how to install transmission drive belt in C111HL John Deere tractor [ 1 Answers ]

Need step by step to to install transmission drive belt in C111HL John Deere Tractor

John Deere 316 cranks but shuts off when put in gear [ 1 Answers ]

When I start my John Deere 316 it cranks fine, but when I put it in gear it shuts off. Does the same thing when I try to engage blades. Thanks!

John Deere 316 dies when hydro engaged [ 2 Answers ]

I have a 1986 John Deere Model 316 riding tractor. I have a problem with a safety switch somewhere that I cannot seem to locate. When I start the motor and try to engage the hydrostat or the pto, it dies. I have replaced the switch on the hydro control and cut the wires on the seat switch and...


View more questions Search