Ask Experts Questions for FREE Help !
Ask
    chase10's Avatar
    chase10 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 18, 2012, 10:27 AM
    2006 troybuilt 21hp vtwin
    My lawn mower deck belt broke, I cannot figure out how to get tension on the idler pulley, or where the extension spring is to mount
    crigby's Avatar
    crigby Posts: 4,343, Reputation: 107
    Outdoor Power Equipment Expert
    		  
    #2

    Jun 28, 2012, 01:29 PM
    Hi,
    There are multiple 42" and 46" decks. You may wish to try the link in my sig or my id(crigby) and pick my home page to see if that helps.
    Peace,
    Clarke
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

20 HP Vtwin briggs engine pulley removal? [ 3 Answers ]

I have a 20 HP Briggs that needs the engine pulley removed. There were two pulleys on the shaft. The lower pulley was removed by simply removing a bolt at the lower end of the shaft. The upper pulley looks to be keyed for the shaft. I can not get this pulley to come loose. I have tried about...

I have a lawn tractor with a 20 hp ohv vtwin problem [ 0 Answers ]

The engine on my lawn tractor,20 hp ohv vtwin. Starts fine but when warm cuts out I have changed the fuel filter and think it may be the ignition coil. What do you think?

Changing Drive Belt on Troy Bilt Riding Mower 21HP [ 1 Answers ]

I saw a previous question from cosmokramer about routing the belt on a troy bilt mower. I have a similar question for a troy bily riding mower 21HP model # 13AT609G76637747. How do you install a drive belt for this model? Is it the same as the answer to cosmokramer where you remove the cover? ...

Diaghram of Carb on Vanguard 21HP [ 5 Answers ]

Is there a "free" diagram online? I need to do a Carb Cleaning due to the "black-smoke" during heavy engine loading. I have read quite a bit here and I feel a good cleaning might solve my problem, but I do not have any "pictures" to guide me. I have torn down a few carbs, but this will be the first...

View more questions Search