Ask Experts Questions for FREE Help !
Ask
    ryansupr's Avatar
    ryansupr Posts: 1, Reputation: 1
    New Member
     
    #1

    Apr 13, 2011, 03:20 PM
    I have a lawn tractor with a 20 hp ohv vtwin problem
    The engine on my lawn tractor,20 hp ohv vtwin. Starts fine but when warm cuts out I have changed the fuel filter and think it may be the ignition coil. What do you think?

Check out some similar questions!

MTD lawn tractor starter problem [ 2 Answers ]

I've got a MTD lawn tractor 12.5 briggs have the same problem that was posted earlier. I did jump start it and the starter works. I changed the switch and solenoid. The switch will kill the engine. When I turn it to start it will not engage the starter. If I jump across solenoid which is under the...

Why won't my john deere sabre 14.5 OHV lawn tractor start? [ 2 Answers ]

Why won't my john deere sabre 14.5 OHV 32 or 36 inch cut lawntrctor start? I have adjusted the valves once because iwas told to try it,and it started I mowed my lawn with it then a week later I mowed my lawn again and after that it wouldn't start again. I was told that the head gasket was the...

Craftsman lawn tractor with Briggs & Stratton 18.5 HP OHV, Inteck engine [ 23 Answers ]

Howdy, My craftsman lawn tractor has served me well for many years now with nothing more needed than checking the oil and putting gas in her... so I guess I'm due. Anyhow, I'm not so great with diagnosis, but I can change parts if I know what's wrong, thus this post... I'd just filled...

Lawn tractor starting problem [ 1 Answers ]

OK Mr. and Ms. know-it-all's. A friend gave me a Sears Craftsman Lawn tractor which has NOT been running for years. When I try to start it, the motor makes about a half turn. When I leave the spark plug OUT, the motor will spin like it is supposed to. Put the plug back in and the motor will not...

Craftsman lawn tractor with Briggs & Stratton 18.5 HP OHV, Inteck engine [ 4 Answers ]

Engine worked fine last week and for 3 minutes after start this week. Then the engine sound changed. Itd made sounds like metal balls banging around inside. Now it will not start / turn-over. Just the sound of metal balls banging around inside the top of the engine. Any ideas on what the problem is?


View more questions Search
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.