Ask Experts Questions for FREE Help !
Ask
    Lin Golasa's Avatar
    Lin Golasa Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 14, 2012, 05:02 PM
    Can for older track light
    My hs was built 28 yrs ago and I still have some old track lighting with the straight cans. I am in need of a replacement since one keeps 'blowing' the bulb. Anyone know where I can find this?

    Tks
    tkrussell's Avatar
    tkrussell Posts: 9,659, Reputation: 725
    Uber Member
    		  
    #2

    May 16, 2012, 05:23 AM
    There are dozens of brands currently available, could be your brand is or is not made any longer.

    Without the brand, we have no way of knowing.

    I suggest you bring a sample track head to an electrical distributor or a lighting showroom to see if they can determine ehat brand of track lighting you have, and if they can find a replacement unit.

    Or they may be able to determine if they have replacement lampholder.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Ikea radium 5 light flexible track light won't work [ 4 Answers ]

HI I've now purchased 2 Ikea radium flexible track lights for installation in my kitchen and neither has worked for longer than a few seconds. As I assumed that the first one was a bad transformer and no longer had the receipt etc, we drove down to Ikea and bought another set. If you know this set...

I need help with a Hampton Bay Track Light that won't light [ 1 Answers ]

The track lighting is in my kitchen. Tried searching what I thought was the part number, but found nothing. The light quit working, so I changed bulbs. No luck. Light is wired between two three way switches, one being a dimmer. Bought new 3 way dimmer identical to one present, and wired the same...

I cannot find the button to push to light pilot light on older Maytag washer. [ 6 Answers ]

I am trying to light the pilot light on my older Maytag dryer. I cannot find any button to push while lighting the light area. All I see are screws, and electrical wire connections. The dryer does not heat and I assume that it is old enough to have a pilot that needs lighting. Thanks

One light in my track light doesn't work. I have replaced the bulb,still not working [ 4 Answers ]

I have a track light of three mini-floods. (not sure what brand.) I have replaced bulbs before. Now, one end light (never been replaced) is not working. I put a new bulb in, and it still won't work. I have made sure that the connection is still there, and that the individual on/off switch on...

Hampton Bay track light - pendant light cord length [ 2 Answers ]

How can I shorten the length of the light cord on a Hampton Bay track system ? There is a tube that plugs into the track that has a serries of screws but there is also a screw at the light base also.

View more questions Search