 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
Check out some similar questions!
I have a Rheem a/c unit that the fan motor quit. I took all the information off the old motor and went to a local supply store and they cross-referenced the numbers and gave me and Emerson motor. All the specs are the same, 1/5 HP, 1075 RPM, 60 Hz, 1.3 Amp, single phase. When I got home, I took...
Any recommendations? New motor apparently is capable of running in either direction by switching brown and purple wires going to the capacitor. Looks like then either the remaining brown or purple is spliced to or hooked up to the same terminal as the yellow. Thanks.
I am replacing my Payne 1/4 hp condenser motor with an A.O. Smith multi HP motor. I'm also replacing the capacitor (a round three prong piece) with an oval (two prong piece). In looking at the wiring diagram I'm supposed to connect the wires as follows: the two brown wires to the capacitor,...
I had water dripping into the condenser now the stop running,is it just replacing the fa motor,is more to it.
The condenser fan motor on my "york" unit locked up. I replaced the motor but the new motor stops working after about 20 minutes. The condenser continues to work but obviously overheats because the fan is not working. The only difference between the old motor and the new one is the RPM. The new...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
