Ask Experts Questions for FREE Help !
Ask
    judgedeeman's Avatar
    judgedeeman Posts: 1, Reputation: 1
    New Member
    		  
    #1

    May 23, 2009, 05:08 PM
    Replacing condenser fan motor
    I had water dripping into the condenser now the stop running,is it just replacing the fa motor,is more to it.
    letmetellu's Avatar
    letmetellu Posts: 3,151, Reputation: 317
    Ultra Member
    		  
    #2

    May 23, 2009, 06:58 PM

    I don't understand at all what you are asking so would you please state your question again. Remember the outside of the AC is the condensing unit, the inside is the air handler or furnace and the Evaporater coil.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Wiring condenser fan motor [ 1 Answers ]

I need to replace a condenser fan motor for a rudd outdoor unit. The old motor has 3 wires, orange, brown & black. The new motor has 4 wires, brown, brown with white stripe, black & yellow. How should the wires be connected?

Installing New condenser Fan Motor [ 2 Answers ]

My Exterior condenser fan motor just went out. It is a 17 yr old York. The motor is a 1/4 HP, 208-230V 1.4Amp. I have looked around and an exact match cannot be found. The folks at the supply store have a 1/4 HP motor of the same voltage but 1.5 amps. They told me the amperage difference was...

Fan condenser motor [ 1 Answers ]

I'm trying to find a specific Emerson cond. Fan motor HQ 1086485EM and have not been able to find on any sites Any suggestions?

Condenser fan motor overheats [ 3 Answers ]

:mad: replaced condenser fan motor that overheated and new motor overheats and thermally shuts down. Also replaced capacitor. The motor is properly grounded and spins in the correct direction. It seems like there still is a voltage problem. Any ideas?

Wiring Outside A/C condenser Fan Motor [ 1 Answers ]

Need help wiring a new outside a/c condenser fan motor. Old fan motor has 3 wires: black, blue, light orange. Black to one side of contact, light orange to other side. Blue to capacitor. Contact has 5 connectors.. one side: black from motor, black to inside the condenser. Other side: dark orange...

View more questions Search