Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
1991 Honda Civic
[ 15 Answers ]
I have a problem with my 91 Honda Civic. The ECU codes are 1, 6, 7, and 17. I can start the car fine. After running about 3-4 minutes just idling it begins to seem to choke for fuel. Giving it more gas will help, but it still wants to sputter. If I drive it after starting it it will run fine...
1991 honda accord ignition switch
[ 8 Answers ]
My ignition failed to turn anymore which proved to be the key lock going bad tried replacing with a new one from schucks but every time we do as it states you can only turn the key from positions 1-3 and not to the off position to remove the key. According to the instructions you put the lock in...
1991 Honda Civic Ignition
[ 7 Answers ]
I am referring to an article posted by CroCivic in May 2005, which details testing the Honda ignition system. In the section on how to diagnose the Igniter Unit, I do not have continuity between the BLU wire and ground. The WHT wire measures 198k ohms. The article states to check for an open in...
1991 honda civic dx
[ 1 Answers ]
thank you for the replies to my previous question. I do intend to change the trany fluid n filter. There's sum minor things that need to be done like new plugs n wires. I've noticed a small missfire in a cylinder but no biggie. I've tried searchin the net but haven't had good luck finding what the...
1991 honda civic dx
[ 1 Answers ]
OK, just bought a honda civic dx, excellent shape and condition. I've noticed it shifts a little lazy... does that have anything to do with the shift lock release on the shifter? What exactly is the shift lock release? View more questions Search
|