 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay ceiling fan with halogen lights
This is not my fan so don't know it's history.
But all of the lights stopped working, but the fan still works and they are both connected to the same wall switch. Can't find a remote but I think it may have had one. How do I rewire it for no remote. It dose have halogen lights. I think it had a remote because there is a little black plastic part in the light base and it has a black red and blue wire connected to it. |
||||
|
||||
|
Brand and model would help. Receivers are normally inside the canopy so start by reming that. Receivers are boxish with 2-3 wires coming in from the ceiling box and 3-4 wires exiting to the fan and light. The light power wire is most often blue
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Installed a Hampton Bay 52" ceiling fan with light powered by remote unit. Fan works perfectly with remote. Lights work perfectly if you turn them on before the fan. However, if you turn the fan on first, then the lights, the lights will only come on dim. Ive checked and rechecked connections-...
I heard a pop and one light bulb burned out of our Hampton Bay, we replaced it but now the 3 lights just stay on dim. Could it possibly be a potentiometer? Or a burned wire. I assume if it is a burned wire the bulbs would not be lit at all. Thanks, Timmy
I just purchased a hampton bay carriage house II ceiling fan. As I installed each section, I checked and rechecked wires and fitament being careful not damage anything. When I turned on the fan, only 2 lights worked (opposite sides of each other). I removed the bulbs of the non working and replaced...
Model - Portland -52 inch I installed the ceiling fan and lights The fan works perfectly the lights do not come on Now what?
I purchased a 5 set accent light 120v halogen accent lights. Can I put them on a regular single pole wall switch without a transformer?
View more questions Search
|
