 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hampton bay ceiling fan LIGHTS
I heard a pop and one light bulb burned out of our Hampton Bay, we replaced it but now the 3 lights just stay on dim. Could it possibly be a potentiometer? Or a burned wire. I assume if it is a burned wire the bulbs would not be lit at all.
Thanks, Timmy |
||||
Check out some similar questions!
Installed a Hampton Bay 52" ceiling fan with light powered by remote unit. Fan works perfectly with remote. Lights work perfectly if you turn them on before the fan. However, if you turn the fan on first, then the lights, the lights will only come on dim. Ive checked and rechecked connections-...
Hello, appreciate any help. It just stop working can't honestly say what stop working first or if it happened at the same time. The switch at the wall is working. So I'm assuming it is getting power? I took the bulbs out and disconneted the lower unit by glance everything appears to be fine. I...
I have a Hampton Bay with a light. The light works but the fan does not. I can feel a slight hum of the motor and sometimes it appears the blades may move a bit but really there is nothing. It is about 15 yrs old. I have another one like this, same age and it works fine. Before I start taking...
I just purchased a hampton bay carriage house II ceiling fan. As I installed each section, I checked and rechecked wires and fitament being careful not damage anything. When I turned on the fan, only 2 lights worked (opposite sides of each other). I removed the bulbs of the non working and replaced...
Model - Portland -52 inch I installed the ceiling fan and lights The fan works perfectly the lights do not come on Now what?
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
