Ask Experts Questions for FREE Help !
Ask
    Towbar's Avatar
    Towbar Posts: 2, Reputation: 1
    New Member
     
    #1

    Apr 30, 2012, 04:58 PM
    Entry door with only one opening cut for a lock
    Does anybody currently sell an entry door with only one opening cut for a lock?
    creahands's Avatar
    creahands Posts: 2,854, Reputation: 195
    Ultra Member
     
    #2

    May 1, 2012, 06:12 AM
    What type of door? Metal or wood? U should be able to order door with only one lock hole. Talk to service dept at big box store.

    Chuck
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #3

    May 1, 2012, 06:32 AM
    And of course where is this at ? And are you looking at the lowest price point? I agree with Chuck above, it should just be a matter of going into one of the major stores and ordering one.
    ballengerb1's Avatar
    ballengerb1 Posts: 27,378, Reputation: 2280
    Home Repair & Remodeling Expert
     
    #4

    May 1, 2012, 07:02 AM
    Yes they may sell them but can you clarify your question
    Towbar's Avatar
    Towbar Posts: 2, Reputation: 1
    New Member
     
    #5

    May 1, 2012, 07:25 AM
    Quote Originally Posted by Fr_Chuck View Post
    And of course where is this at ? And are you looking at the lowest price point? I agree with Chuck above, it should just be a matter of going into one of the major stores and ordering one.
    That was my opinion also, but my friend who needs the door said no one would supply one. Must have been a misunderstanding in there somewhere because a quick call to Lowe's confirmed that they can provide the door with 2, 1, or zero openings cut for locks. Thanks.
    Fr_Chuck's Avatar
    Fr_Chuck Posts: 81,301, Reputation: 7692
    Expert
     
    #6

    May 1, 2012, 09:22 AM
    Thank you for getting back to us, yes, was thinking perhaps you were from a nation where supplies were limited. My back security door has one opening for a dead bolt. So I know they are possible

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Kenmore Gas Range Door Lock out, door is open [ 3 Answers ]

Hello, I have a Kenmore Gas Range. My manual has the following model numbers on it: 790-75922, 790-75923, 790-75924, and 790-75929. I was trying to reset an option and pressed the "stop/clear" button and held it for a few seconds. The door locking mechanism started to engage, so I opened the...

Expand a 4' door opening to 5 1/2' opening on a loadbearing basement wall [ 2 Answers ]

I have an unfinished basement that has a load bearing wall down the center of the basemant. It supports the center of the house. It runs 36 feet and perpendiculars into another load bearing wall. The 36 foot span has two 4 foot openings with 2 2x 8" headers in each opening. Both openings occur...

10 foot garage door opening,cut out of 12" block wall,from small 2 story commercial b [ 5 Answers ]

I cut out a 10' garage door opening in small commercial buliding(2 story,12" block) i have put and adequate steel header in place,but somebody told me i am to "tie-in" bothe ends of the header to the masonry... is this a requirement? Or is this just an option? Can anybody help me? Are...

Garage door opener prevents door from opening all the way -- how to fix? [ 1 Answers ]

My wife and I moved into a house three months ago and we didn't realize this problem before we bought it. I'm trying to solve a problem with an existing garage door and Genie opener which due to the amount of backroom along the tracks, doesn't allow me to open the garage door the full length...


View more questions Search