Low Toilet Flange

actaylo Posts: 1, Reputation: 1

New Member

Feb 22, 2007, 10:23 PM

Low Toilet Flange

I have a toilet that is approximately 1/4 to 1/2 inches too low. It is a PVC flange. Can it be raised or adjusted a little higher?

iamgrowler Posts: 1,421, Reputation: 110

Ultra Member

Feb 23, 2007, 09:27 PM

Try this.

Add your answer here.

Check out some similar questions!

Toilet Flange [ 1 Answers ]

I'm remodeling my bathroom. I've removed the old toilet and dug up the old flooring and subflooring. Together they were about 7/8" in thickness. Since I will now have a lower floor, what do I do to put in a new toilet flange? The old one was brass and only 1/4" thick and simply had the drain...

Toilet flange [ 1 Answers ]

Hello, I realized as I was installing the subfloor in my new bathroom that I had cut off the pvc to short. It is slightly lower that the subfloor. Is there a longer flange which will solve this problem or should I remove the floor add a coupling and more pvc to raise the height? Thanks, m2

Toilet flange HELP! [ 3 Answers ]

HI, I need some good professional advise. My toilet was leaking and I removed it to find that the toilet flange was broken on one side. The flange and lower pipe appear to be cast iron 4 inch. I must replace some of the damaged flooring but am at a loss as to how to remove the cast iron flange from...

Toilet flange too low [ 1 Answers ]

I discovered a leak in the base of the upstairs toilet that had soaked the subfloor and cause the tile to come loose. I removed the tile and discovered that it had been set on a plywood backer. I removed the plywood and cut out the rotting wood around the toilet. This exposed the ABS plumbing...

Flange on toilet [ 1 Answers ]

I have just installed a new floor in the bathroom. What is the maximum space allowed between flange and bottom of toilet?