Ask Experts Questions for FREE Help !
Ask
    midwayer209's Avatar
    midwayer209 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 12, 2010, 09:12 PM
    I got a 91 civic I changed the cap dirsderb roter,plugs,wires,valve cover gasket,seal
    I got a 91 civic I changed the cap dirsderb roter,plugs,wires,valve cover gasket,seals,and still the car don't want to run good. Once I turn it on after a few minutes the check engine light turns on then when I drive it I could only pick up the speed to 75mph. When I shift in the gears I can't rev it all the way when I do it bogs out. I check the code light under the passanger dash it flashs 4 times then 8 back to back? Please help me!
    TxGreaseMonkey's Avatar
    TxGreaseMonkey Posts: 16,761, Reputation: 5597
    Uber Member
    		  
    #2

    Apr 13, 2010, 05:22 AM

    4 CKP - Crank Position Sensor

    8 TDC - Top Dead Center Sensor

    Since you are registering these codes, the distributor is shot. The internal sensors have failed and they are not serviceable. Install only a new genuine Honda distributor housing--other brands are not reliable.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

How to get to rear valve cover gasket 2001 town&country to replace [ 0 Answers ]

How hard is it to change rear valve cover gasket on 2001 town & country 3.8

Changing rear valve cover gasket [ 0 Answers ]

I have a 2002 chrysler town and country... 3.3... I need to change the rear valve cover gasket and would like to know the proper steps to take to get to this part to change it.

Steps to Replace Valve Cover Gasket on 93 F350 7.3L [ 2 Answers ]

My son just picked up a 93 Ford F350 7.3 IDFI w/a leak on the passenger side valve cover gasket. The replacement process looks pretty involved and the dealer wants $270 for that side. Does anyone have any suggestions on what needs to be completely removed vs moved and the steps you would take to...

1992 Acura Valve Cover Gasket *urgent* [ 8 Answers ]

Hey, Rego here, I've got a 1992 Acura Vigor GS that needs the valve cover gasket replaced, was wondering if anyone could tel me how this is done, or direct me to a site with a how to? I have a relative idea about taking the bolts out diaganolly, but that's about it. Many thanks

View more questions Search