Ask Experts Questions for FREE Help !
Ask
    gophersal's Avatar
    gophersal Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Apr 6, 2012, 01:15 PM
    How to install 3 a/c units on one thermostat
    Can I install a single themostat to (2) geothemal heat pumps with a floor radiant heating system?
    T-Top's Avatar
    T-Top Posts: 1,871, Reputation: 100
    Ultra Member
    		  
    #2

    Apr 6, 2012, 05:10 PM
    Not with out a dual fuel zone board and thermostat. It will not work right with out it. Many have tried and the same amount have failed by not using the right controls.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Electric wiring a thermostat to two units? [ 0 Answers ]

I have two electric 1000 watt heaters self controlled to a 240 volt circuit I want to connect them to one termostate so that they operate from that termostate.

Tried to install new thermostat [ 13 Answers ]

I am in desperate need of help. I turned off my thermostat (not from the fuse box outside)---I unscrewed the box and the wires. I was going to try to install my new thermostat. The old unit is 7 wires and the new is 6, so I was completely confused, so I decided to put the old thermostat back on....

Install a new Thermostat [ 0 Answers ]

I have a Maple Chase Thermostat. I want to change to a Honeywell but I could not get it to work. Here is the wire information. C R Y2 G W2 O B (This is on the Maple Chase Thermostat) Bl R Y G Wh O Br ( these are the wire color connected to the Maple Chase) L Y2 W2 ...

Where to install thermostat [ 2 Answers ]

I own a 1986 modular home. The heating/AC unit is 23yrs old. We had a professional come in and give us an estimate. The original thermostat is in the center of the home. This man said if they couldn't find the wires to hook up the new thermostat, that they would just put it in the utility room,...

I need help to install new thermostat [ 3 Answers ]

I have York brad manual thermostat. I bought a Honeywell RTH230B digital. York has 6 wires which labeled as O,R,W,Y,G,B(blue). Honeywell has 5 labeled as Rh,Rc, Y,W, and G. Also Rh and Rc are jumped . What is the right way to connect the new one? Y, W, and G are okay. Thanks for the help....

View more questions Search