 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hooking up a fan/light switch to two 3 ways switches
I am trying to hook up a ceiling fan with a 3 way switch that will control the fan and light independently while I would like the light to still be controlled by the 3 way on the other side of the room. That switch is just on or off switch. My problem is the new switch with the dual controls has in its box a 14/2 coming in as the power feed and then it has two 14/3 wires coming into the same box one going to the fan/light and the other to the other 3 way on the other side of the room. How does it get hooked up.. Help!
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I am hooking up a fan/light to a tm811 switch. I have hooked it up all directions still can not get it to work the correct way. Right now I have it red wire from fan/light to COM A. Black wire to SP A and then the white wire to SP B. I only can get the light to work from the top switch. Nothing...
In both toilets the light switch activates the ceiling fans and both switch are hot to touch, infrared gun reads 45 to 47 Deg C.
I have 1 single pole switch for fan, and 2 three way switches to run light only. The power in is by the double box that will house the fan switch and the #1 light 3way. The other box houses the other three way switch. My fan switch is turning the light on and off, the three ways are doing nothing....
How do I wire... Ceiling Fan with Light switched separately. Light to be controlled by two 3-way switches and fan controlled by a separate single switch. :confused:
View more questions Search
|
