Ask Experts Questions for FREE Help !
Ask
    lee5443's Avatar
    lee5443 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 27, 2012, 08:08 PM
    Hampton Bay.. Light works but fan doesn't.
    Installing a Hampton Bay ceiling fan with remote. The light works but the fan doesn't. I rewired the fan without the remote device to make sure it works and the fan works like that but after re-wiring again the fan still would not work. I have checked and rechecked the wiring and it is correct. The remote and device on ceiling are set to the same thing.
    MelindaTan's Avatar
    MelindaTan Posts: 3, Reputation: 1
    New Member
    		  
    #2

    Mar 27, 2012, 10:13 PM
    It might be the wiring problem..
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Hampton Bay ceiling fan light fixture stopped working but fan still works why? [ 14 Answers ]

New light put in my Hampton Bay ceiling fan, but then after a few days, no light bulbs work but fan runs fine, why is this happening?:confused:

Hampton Bay Remote Ceiling Fan - light works - no fan [ 2 Answers ]

After about 4 months of use, this began to happen. I would try to turn on the fan (either Low Med or High) and the fan would barely turn. Sometimes it would work - this lasted for about 5 days. Since then, if you try to turn on the fan, you get no response. Now, the light will still turn on...

Hampton bay uc7083t - fan works, light doesn't [ 22 Answers ]

Hoping someone out there can help me... I have a Hampton (Champion) Bay ceiling fan uc7083t. The light has a dimmer (only on/off control is on the remote) and one day the light just stopped working. I've replaced the bulb with 4 different ones (sconce, appliance, 75w, 100w) thinking that might be...

Hampton Bay Fan w/ Remote: Light Works, Fan Doesn't [ 4 Answers ]

Sorry if this has been answered elsewhere but I couldn't find what I was looking for. I just installed a Hampton Bay Andover fan w/ remote (no pull chains) but the fan won't start. The light fixture works fine (using the wall switch remote) but I can't get the fan going. I tried the reverse...

Hampton Bay light works, fan don't [ 3 Answers ]

Have a Hampton Bay 3 speed Carousel II (childs fan). Not on a remote. Lights work fine. Fan quit working recently. When turned on (pull chain) you can feel/hear slight hum but the blades just don't want to run and it seems hot to the touch. It turns freely by hand. Anyone have any...

View more questions Search