 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
My Kenmore Ultra Wash 665 16812990; for 2 years the LOCK ON light flashing can't get
I can't get it to start. Have tried to reset at Breaker Box, also hold down the NO HEAT DRY button for 4 seconds - can't get it to start or run. Should I pay for a repair call or just buy a new dishwasher? I have lived without it for 2 years, but really need to have a running dishwasher. Thanks.
|
||||
Check out some similar questions!
Problem: This LOCK light (LED) is ON all the time, and the rest of the LEDS are dim (really low light ON). 1. To reset this washer I press and hold for 10 seconds on the , then it goes back to normal condition only for 5 minutes. During this period, I can operates this machine and it...
Kenmore ultra wash 665.15779990 lock light on
I have a kenmore ultra wash dishwasher model 16a69990/665 that won't run. The Lock On light is flashing. Tried turning off at power source, unplugging and resetting with random button pressing but no luck. Any ideas?
After my washer completed every cycle but drain and dry, it began flashing the "Lock On" indicator. At this point, nothing will work at all. There was a little water in the tub. Also, when I press the cancel button, both the Lock On and Cancel/Drain will begin to flash together. 1) unhooked...
After my washer completed every cycle but drain and dry, it began flashing the "Lock On" indicator. At this point, nothing will work at all. There was a little water in the tub. 1) unhooked the drain hose to get the water out and it flowed freely. 2) shout off power for over an hour. 3)...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
