[tuetinh]

Problem: This LOCK light (LED) is ON all the time, and the rest of the LEDS are dim (really low light ON).

1. To reset this washer I press and hold for 10 seconds on the [No Heat Dry], then it goes back to normal condition only for 5 minutes. During this period, I can operates this machine and it functions properly. After full cycle operation, the LOCK light is back ON all times. Or 5 minutes after reset without operating machine, the LOCK light is back ON all times.

2. I am not satisfied with the solution#1.
2a. Power OFF the machine.
2b. Unscrew the door (8 screws).
2c. Remove lid covering the control circuit.
2d. Remove ribbon cable from the connector housing.
2e. Put every back (ribbon cable is still not connected)
2f. Power ON the machine
2g. Power OFF
2h. Reconnect ribbon cable back to the circuit.
2i. Power ON

The Lock light is off for a few hours and problem as mentioned above occurs again.

Anyone knows how to solve the problem or any hint will be appreciated.