Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Very stubborn shower arm
[ 6 Answers ]
I am not very good at this happy homeower stuff and I am trying. This question may seem trivial and I am not sure what to do next. I am trying to replace a shower head that is probably the original one in my 55 year old home. I figured out that I will have to replace the shower arm (the...
Water comes out of shower valve but not shower arm... help!
[ 2 Answers ]
Hi all, I just installed the upgrade kit to convert my Delta Monitor 1500 to a Monitor 1700 and after assembling everything I am getting zero water out of the shower. When I turned the water on when I was finished there was very weak pressure and then it stopped completely. When I remove the...
New shower arm installation.
[ 4 Answers ]
I am installing a new shower arm. It screws into a cpvc fitting in the wall and I can't rotate it so it faces downward when it bottoms out inside the fitting. I added an extra layer of teflon tape but it still faces upward. How many layers of teflon tape can I add. I have used 3 layers so far. I am...
New replacement shower arm is leaking
[ 11 Answers ]
The shower arm on my shower broke and I had to replace the shower arm and flange. I put pipe thread seal tape on the end of the new pipe before putting it in. I tighten the arm on the pipe and turned on the water to check for leaks. It still leaks. I tried to tighten it more but ended up...
Old shower arm
[ 5 Answers ]
I'm having a difficult time taking off an old ball type end shower arm. I tried twisting it off with a wrench and I'm afraid that I'm going to break the pipe off the wall. Is there a way to check that the this old ball type end shower arm is screwed in or if the shower arm attached or is there a... View more questions Search
|