Ask Experts Questions for FREE Help !
Ask
    chubber's Avatar
    chubber Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 20, 2012, 12:02 PM
    Axle came out
    Hi I wa strying to the wheel off my jdsxt38 and the entire axel came out. I put it back in and worked but but it won't stay in. Is there a snap ring inside of the rear end or did I really screw something up?
    DG's Avatar
    DG Posts: 1,375, Reputation: 109
    Ultra Member
    		  
    #2

    Mar 20, 2012, 04:04 PM
    There's a snap ring inside the trans-axle , it will have to come apart to repair.
    Luck
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Torque? The axle weights 5kg its 6' wide, it's a vertical axle with a... [ 10 Answers ]

The axle weights 5 kg it is 6 ' wide, it is a vertical axle with a magnetic barring at the base of the axle working on opposing energy, the axle is also in a vacuum of 3lb sq inch? Around the axle are nine 3 " wheels connected to the main central axle each of these weighs 0.4 kg each with a...

Cv axle [ 1 Answers ]

How to get a cv axle out of the left side of a 98 ford esscort it won't come out of the trans

Huskee Rear Axle [ 1 Answers ]

What kind of oil do I use for the rear axle? It was cleaned and now needs to be lubed again but not sure what to use. Thanks

Not sure with axle solution [ 1 Answers ]

Hi, My car was bumped on the rear and the rear axle is no longer in position and my tiers are only getting wearied at the out side and would like to find out if wheel alighnment could fix the problem or get the new rear axle

Cv axle ford escort [ 3 Answers ]

I am trying to replace driver side cv axle on 92 ford escort. What do I need to remove old one?

View more questions Search