 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Th3210d1004 wiring help!
I have a Honeywell TH3210D1004 Thermostat and a carrier high efficiency heat pump? (I think , I included pics of everything), here's the deal I wired everything up and when I cut the circuit breaker back on the one that says "Heat" arcs outs and breaks off. I need help here...
 
|
||||
|
||||
|
|
||||
|
||||
|
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
Current thermostat Armstrong 35614B001) has Y, G, O, W, R, C(blue wire) connections New thermostat (Honeywell TH3210D1004) has E AUX Y G O L R B C connections How do the wires (Yellow, Green, Orange, White, Red, Blue) go to the new Honeywell thermostat?
I am replacing a Janatrol T-state with a Honey well Pro 300 M/n Th3210D104 the wires from the old one were wired as such; Wx2= white, Y= Yellow, G= green, O= orange, R= red, B= , C= blue, E= tan, (there was a non used black wire). The new T-state has the following; E, Aux, Y, G, O, L, R, B, C. I...
I am replacing a Trane Baystat 239 thermostat with a Honeywell TH3210D1004 thermostat. The Trane thermostat is wired is follows: Terminal Color of Wire X2 Black O Orange G Green Y Yellow T Tan R ...
My existing wires do not match new stat diagram
There are 4 lights Each light has a bnlack and white wire coming from it. The light switch has a bule wire, a red wire and a black wire from the main housing. There is also a white wire coming from the main housing. The fan operates fine I cannot get the lights to go on. What is the wire sequence?
View more questions Search
|
