Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
J-Pipe leaking where PVC meets metal ?
[ 1 Answers ]
In my kitchen I have replaced everything with PVC, for the most part, and it's working fine. I am having issues where the J-pipe (PVC) meets metal. I am leaking there despite many attempts at re-seating the pipe and trying again. It is a very difficult connection, and turns hard. It takes a...
Am replacing metal roofing on bay windows Can shingles be placed over metal roof?
[ 3 Answers ]
Metal is not copper. Also, does anyone know what the overhang should be (for shingles on bay window roof). Thanks
PVC or Metal conduit into a subpanel?
[ 4 Answers ]
Hello, I'm installing a 200 amp subpanel in my barn, and am using 2" PVC conduit (buried) from the house. As I was going into the barn, I got to thinking that perhaps metal should be used above ground (in the wall feeding the panel). I would prefer to use the 2" PVC, all the way, but was...
Metal to pvc
[ 3 Answers ]
Can you install brass or other metal pipes directly to a pvc fitting more specifically a male metal fitting into a female pvc fitting?
Metal 2 pvc is there a way
[ 2 Answers ]
I'm trying 2 install a water filter off my water line coming into the house. They tell me it needs to be installed before it goes any farther than when it comes in the house. The problem I'm having is the house is all metal screw pipe. The big question is will pvc glue to it or screw to it or any... View more questions Search
|