Ask Experts Questions for FREE Help !
Ask
    ANHacking's Avatar
    ANHacking Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 7, 2012, 01:01 PM
    Bryant furnace model 310AAV blowing cold air, error code #13
    I have a Bryant furnace model 310AAV that is displaying the #13 error code. The furnace is blowing cold air... I've flipped the power and gas off a couple times and now I'm letting it run.

    Code #13 says after 3 hours the control will auto reset... does this mean if I leave it running for 3 hours, it will reset and work fine?

    Thanks.
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 8, 2012, 12:32 PM
    The reset that this is talking about is not what you think. You have an airflow problem or inadequate combustion air. This can be caused by a dirty filter, dirty AC coils, or problems in the blower. You need to fix problem then cut off power for a minute to reset furnace. Use the manual to run a test, if necessary. Go here for manual: http://homeappliance.manualsonline.com/manuals/mfg/bryant/310aav.html?idRes=16430908
    Let us know what you find. Don't ignore this as it can cause big problems for your safety.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Bryant furnace model 376cav, error code 24. [ 7 Answers ]

I am getting error code 24 on my bryant furnace. Could someone please help me by letting me know what the code is, and how to fix it? I was trying to install a new thermostat and might have got wires crossed. Thanks

York furnace flash error code 6 times (blowing cold air) [ 3 Answers ]

Hello, I have a York (forced air) gas furnace that's 9 years old. Every winter it seems like I have to replace the pressure switch ( round switch with 2 connections & air hose). I hear the blower come on, burners ignite and then within a few seconds they go off with the red light flashing 6 times....

Bryant air conditioning unit 310AAV/JAV blowing warm air? [ 1 Answers ]

The unit is 2yrs old. Also it has been turned off for two weeks. Checked the filter, very dirty, but a new one in. Still warm air only.

Bryant 310aav error code 31 [ 1 Answers ]

Bryant 310 aav error code 31. My furnace is 3 yr old and gives error code: 31. The blower fan working fine, but the inducer motor does not start. Also the error code tells the pressure switch open not closed. Will this be a problem with Inducer motor? What are the various things I need to check...

Gas furnace blowing cold air (Bryant 310AAV) [ 5 Answers ]

Folks, Could really use some help/advice. I have a Bryant 310AAV gas furnace installed in our home. This is new construction (4 years old) so I assume it's one of the new furnaces that does NOT have a pilot. Here is the problem: The furnace is not blowing any hot air. I've turned the...

View more questions Search