 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Hi Robbie
The disposal would be the GARBAGE DISPOSAL's inlet pipe for a dishwasher. If you don't have a garbage disposal then you must connect the dishwasher discharge hose into as BRANCH DRAIN or BRANCH DRAIN TAILPIECE... see images. Be sure to install a HIGH LOOP in the dishwasher drain hose, i.e. loop the dishwasher drain hose up tight to the bottom of the counter before connecting into the branch drain... keeps water from the sink from draining out of the sink and into the dishwasher. If you have a countertop AIR GAP then you must connect into that.. if not the high loop is the standard practice! Mark |
||||
|
||||
|
Hi robbieb and Welcome to The Plumbing Page. At AskMeHelpDesk.com. You're responding to a 9 year old dead thread so I gave you one of your own. Look in then upper left hand corner of the first post form the date before you post, Thanks,
Mark gave you good advise. Good luck, Tom |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My house (Seattle area) has a Johnson Tee for the dishwasher. Turns out the air vent was never installed properly (20 years now) but it has worked fine so far. I'm curious if I'm supposed to loop the dishwasher drain hose up high on the back of the unit before attaching it to the Johnson Tee. ...
Should the dishwasher be hooked up to the cold or hot water supply?
I have an old dishwasher that was hooked up to the cold water instead of the hot . How do I switch it
I have an old Kenmore, how do I hook up the water line to it, it came with no hoses.
Installed a brand new dishwasher recently. Put a t connection off the hot water pipe that goes to the kitchen sink. However water that is going to the dishwasher is cold. Have pulled the dishwasher out to make sure that we hooked into the hot water and it is definitely the hot water pipe. Any...
View more questions Search
|
