Ask Experts Questions for FREE Help !
Ask
    willie30's Avatar
    willie30 Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 4, 2012, 12:09 PM
    1983 buick lesabre brake lights
    83 lesabre brake lights dim until I turn on tail lighst then no tail or brake lights also turn signal lights don't not working
    CaptainRich's Avatar
    CaptainRich Posts: 4,492, Reputation: 537
    Cars & Trucks Expert
    		  
    #2

    Mar 5, 2012, 08:40 AM
    This could be a simple wiring issue but will definitely require someone local to be looking at various parts of the harness and sockets related to your symptoms.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Buick lesabre 94 problem? [ 5 Answers ]

My buick lesabre turn off after 3 or 5 min aprox running or not, I change the crank sensor, then change cam sensor, also change coils and ignition module but problem persists, what else can I do ?

96 Buick LeSabre Won't Start [ 1 Answers ]

I have a 96 Buick LeSabre. It set up for four weeks and now it won't start. I charged the battery and cleaned the side post terminals twice. I get no power to the dome light or any other instrumentation. It also has two cables going to the positive terminal.

1988 buick lesabre heat [ 1 Answers ]

I have a 1988 buick lesabre that has cold a/c but the heat doesn't work and I don't know why?

1992 buick Lesabre Custom [ 1 Answers ]

OK I bought a 1992 buick lesabre custom for 400 a couple days ago. The people we bought it from claimed the fuel pump was bad and they said go easy on the gas pedal because if you press to hard it won't go anywhere and on hills it really won't work and when this happens the car stays on and just...

89 buick LeSabre thermastat housing? [ 1 Answers ]

A quick question if anyone has done a thermostat on this vehicle. 3800 engine. Does the housing have only one bolt to hold it?? It appears that way , as it is cramped area to see. Also I assume it will have an O ring gasket as well?? Thanks for the help Al

View more questions Search