 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
96 Buick LeSabre Won't Start
I have a 96 Buick LeSabre. It set up for four weeks and now it won't start. I charged the battery and cleaned the side post terminals twice. I get no power to the dome light or any other instrumentation. It also has two cables going to the positive terminal.
|
||||
|
||||
|
. Check all under hood and under dash fuses with a test light or multimeter: https://www.askmehelpdesk.com/cars-t...tml#post252145 Be thorough, since it will save a lot of time and money. . Check the ignition switch for wear, pitting, or melting, if the problem persists. One positive cable goes to the under hood fuse box, the other goes to the starter motor. |
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
My mom has a 94 buick lesabre 3800 with 86,000 miles she is the second owner. The car sometimes has a misfire at 60-65 mph. but the other day she was pulling in the drive way an the engine stopped. It did start right back up but wouldn't stay running. I went out to look at it a few days later an...
OK I bought a 1992 buick lesabre custom for 400 a couple days ago. The people we bought it from claimed the fuel pump was bad and they said go easy on the gas pedal because if you press to hard it won't go anywhere and on hills it really won't work and when this happens the car stays on and just...
I bought a 1 owner 94 LeSabre with 70m miles, excellent condition but have major problems with the car shutting off while driving. Mechanics cannot find the problem (but I've been towed 6 times). Most times, after towing, the car will start right away. The have recommended everything from wiring...
Our 2002 Buick with the 3800c engine at times fails to start after running hard in 100 degree weather. Fuel pump has been checked out OK. Bleeding the Shrader valve on the fuel rail gives a flow of almost vaporized gasoline. Not a stream of liquid. It appears to me the gasoline in the fuel rail...
A quick question if anyone has done a thermostat on this vehicle. 3800 engine. Does the housing have only one bolt to hold it?? It appears that way , as it is cramped area to see. Also I assume it will have an O ring gasket as well?? Thanks for the help Al
View more questions Search
|
