Ask Experts Questions for FREE Help !
Ask
    usdapete's Avatar
    usdapete Posts: 1, Reputation: 1
    New Member
    		  
    #1

    Mar 2, 2012, 04:26 PM
    White roger 50A50-241
    Where can I find a pressure switch, my red light blinks twice?
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
    		  
    #2

    Mar 3, 2012, 08:54 AM
    It will be near the combustion air blower. Trace the wires and you will find it.
Not your question? Ask your question View similar questions
 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

White rodgers 50a50-241 7 flash error code>>> [ 21 Answers ]

I have a York Furnace natural gas with a white rodgers 50a50-241 board, After no heat just blowing cold air I shut off the system let it sit for about 5 minutes and turned back on... worked fine for 3 days. Now it give me 7 flashes from the board after 3 tries at lighting on its own. Ignitor burns...

How do I find a wiring diagram for White Rodgers 50A50-241 [ 1 Answers ]

I nedd to find a web site that I can download a wiring diagram for a York AC & heating unit with a White Rodgers 50A50-241 Thanks, Paul:rolleyes:

White roger 50a50-471 [ 2 Answers ]

I need a new 50A50-471 controller. Is it available in Canada? Thanks, Javid

White rogers 50a50-241 [ 1 Answers ]

I get lockouts about every two weeks and have to clean the sensor again .Bad board?

White Rodgers 50A50 - 241 [ 1 Answers ]

My heater isn't blowing warm air. It doesn't appear to be igniting. What is the normal voltage output of the igniter wire?

View more questions Search