 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have an old 3-speed Craftmade ceiling fan (no light) that was working fine until the chain pulled out of the switch. I replaced the switch with one from Home Depot and wired it the same way. L - Black (power) 1 - Brown (connected to reverse switch and capacitor) 2 - Gray (from capacitor) 3...
I removed the fan switch but did not write down the color with the position. Ihave a 4 wire switch. Black,orange,yellow,and purple. If I find the main source wire , can I then connect it to each of the other 3 wires one at a time and find out which speed each one is or is it the wrong way of...
Is there a diagram to correctly wire a 3 speed fan switch
So here's my problem.. I moved into a new house to find out the fan switch on my ceiling fan is broke. I don't know the maker of the fan but I think I found a similar image of the fan (see below). There's 4 wires (black, purple, yellow, and orange) I would like to know the wiring configuration into...
I have three wires running from the furnace to the electric air cleaner, black, red, and white. I want to run the fan on low, and high when there's a call for heat. Black and red wires have 120 volts. The red is connected to the black wire from the air cleaner and black is not connected. Where do...
View more questions Search
|
