Ask Experts Questions for FREE Help !
Ask
    hattrick's Avatar
    hattrick Posts: 1, Reputation: 1
    New Member
     
    #1

    Feb 25, 2012, 08:30 PM
    Size of grounding ball bearing on frigidaire dryers
    What is the size of grounding ball used in many front load dryers, frigidaire part number is 5303281019
    drtom4444's Avatar
    drtom4444 Posts: 3,282, Reputation: 145
    Ultra Member
     
    #2

    Feb 26, 2012, 07:31 AM
    What are you referring to? I have never seen one.

Not your question? Ask your question View similar questions

 

Question Tools Search this Question
Search this Question:

Advanced Search

Add your answer here.


Check out some similar questions!

Problems with frigidaire dryers? [ 0 Answers ]

My clothes keep getting hung between the basket and the felt while it is turning and leaving brown stains on my clothes. It kind of looks like my basket is sagging a little leaving a gap at the top part of the basket. Not sure if new felt pads will fix this or if if something else in the dryer is...

Distributor ball bearing is shot [ 3 Answers ]

I found out that the insided ball bearing of my 91 honda accord distributor is shot and was told by honda that they don't fix it, they just replace the entire distributor. Since paying $450 bucks seems ridiculous for one worn out part I ended up ordering a bearing from NACHI in Toronto for $53...

HELP! Replacing Frigidaire Dryer rear Bearing Kit [ 2 Answers ]

Hi, I am having some trouble, Can someone Please help! I have a Frigidaire dryer. I have the new rear bearing kit (Part 5303281153 ) if you Google this part you will see the parts in this kit. Here is the trouble I am having 2 things mainly. 1st - I tapped the screw holes on the rear plate, I...

Frigidaire Dryer Bearing - Hole Function [ 7 Answers ]

The rear bearing for my Frigidaire dryer has a three screw holes and another larger hole in it. What is the purpose of the larger hole? Thanks

Frigidaire Dryer Bearing or Roller? [ 1 Answers ]

I have a Frigidaire dryer about 7 YO it has started to allow clothes to get stuck between the drum and the bottom of the outer opening. They get stuck which ruins them leaving a burn mark on the clothes. If I reach inside the drum I can push the front up about 1 inch which closed the gap where the...


View more questions Search