 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
Clare hecla furnace blower fan issue
I have a PG100HBM furnace. When there is a heat demand I can feel the heat coming out from the vents but when the heat is turned off cold air comes out of the vents. Blower can be turned off from the main switch manualy.. it seems like it does not turn off automatically. Can someone please send me a diagram showing where the auto switch is located on the furnace for the blower so I can replace it.
|
||||
Check out some similar questions!
I have a clare furnace model # HEM8 90-8 direct vent. The blower motor started making a lot of noise so I removed it and checked it out. There is a fan blade inside and it broke free from the piece that slips over the shaft. I tried to get it to stay which it did for a bit and it started...
Just started up furnace for the year. Ran OK for a day. Now furnace ignites then blower fan starts will run, stop for a bit, start again, stops, and eventually it starts again and runs until temp is maintained to thermostat setting.
Hi I have a Clare Hecla furnace and I have a problem where I've set the controls at OFF-110F and ON-150F with the limit at 170F. My furnace blower runs continuously 38mins to 24 minutes at a time and shuts down for a 2.5 minutes average. When the heater is on the blower continuous running and never...
If no cool or heat, just fan on, there has blower start in furnace; While in air conditioner, regardless fan on or auto, there will be no indoor blower on at all; While outside condenser and its fan seems fine. I lready jump wires G, RC and Y in T-start, won't see any difference. By the...
View more questions Search
| Question Tools | Search this Question |
Add your answer here.
|
