Not your question?
Ask your question
View similar questions
Add your answer here.Check out some similar questions!
Need to replace 'O' rings and Gaskets in Delta Faucet
[ 1 Answers ]
My Delta faucet which is probably 30 years old constantly drips. I have replaced the shower head so know it is the faucet. It is a single handle push up for on and twist to the right or left for temperature control. How do I replace the o rings and gaskets? Thank you
Replacing a washer tray?
[ 8 Answers ]
I am working on replacing a vinyl floor with a ceramic tile floor (you can see this in another thread that I've started recently). I have just removed all of the vinyl floor and I am ready to start the actual project. This room also has our washer/dryer system. Our old floor had a washer tray...
Laundry tray pipe leak
[ 1 Answers ]
Hot water dripping from faucet in laundry tray.
Laundry Sink Faucet Broken
[ 5 Answers ]
I was turning on the cold water faucet on the laundry tub to rinse something off and the handle went too far and now the water will not turn off, even after I removed the handle and used a wrench to try and turn the screw in; but to no avail. I have to turn the water off at the water meter because...
Replacing a faucet on a laundry tub.
[ 1 Answers ]
I need to replace the faucet on my laundry tub and am having trouble figuring out how to get to the plumbing as it is inside the bracket that holds the tub to the wall. There are three screws holding on the tub one on top and one on each side. However, there is a bolt holding on the screws on the... View more questions Search
|