 |
|
| Browse | Ask | Answer | Search | Join/Login |
|
|
||||
|
How's the flow with the hose unhooked from the shut off valve? How's the flow from the hose when unhooked from washer? If good all around, check to see if there is a screen in the washer threaded port. If no screen there, something in the washer itself is culprit, and would require the knowledge of an appliance repair person. Please let us know what you find.
|
||||
| Question Tools | Search this Question |
Add your answer here.
Check out some similar questions!
I have a single faucet sink where the cold water pressure is fine and all other sinks have good hot and cold water pressure. I replaced the kitchen faucet two years ago along with new lines. As of late I'm getting very little hot water pressure along with having to run the water for about 10...
In my laundry room where you hook up a washer.My cold water has low pressure.When you first turn the valve the water pressure a little better but as you open it pressure slows down.Pressure fine in all other rooms.Can you give me any advise on what could be the problem?
We have a well water system. Strong pressure from water hose (tied in directly to water line leading to house) and strong hot water pressure. Cold water started to slow about 6 months ago. Now it barley trickles through the whole house. We believe there are no leaks be cause pump does not run all...
My hot water pressure in the bathtub works well but cold water has low pressure. I have an old bathtub with the 4 knobs
My kitchen and bathroom sink have no water, period. Hot water seems to be pretty good to the bath and washer but cold water to those 2 locations are very weak. The outside faucet is very weak at best. I have had this problem for quite some time so it's not the fact that they are frozen. I just...
View more questions Search
|
